Adhesive Tape Release Liner
- Material: Paper-based and film-based tape-liner options (PET, BOPP) for coating, lamination, slitting, and die-cutting
- Thickness: Previously published customizable range from 50 to 200 microns; confirm by grade
- Release Force: Confirm by method, adhesive type, angle, speed, dwell, and aging; Light, Medium, or Heavy may be used as informal grade labels only
- Color: Transparent, white, and custom colors, confirm by order
- Size: Flexible sizes, customized to tape-production specifications
- Temperature Resistance: Previously published value -20°C to +60°C; confirm by grade and method, not a universal guarantee
Heat Protect Film Company manufactures Adhesive Tape Release Liner for adhesive-tape manufacturing. The liner protects pressure-sensitive adhesives (PSA) during coating, lamination, slitting, die-cutting, and release, then peels at the intended station. This page is for tape-production liners, including paper, PET, and BOPP options already used in tape converting. It is not a general catalog of industrial silicone-coated PET release film.

Product Overview
An adhesive tape release liner has to stay stable while the adhesive is coated, dried or cured, laminated, slit, and die-cut. Single-Sided liners are used for many single-face tapes. Double-Sided liners and Differential Release structures are used when both sides must release in a defined order, such as double-sided tape converting. The coated side, peel sequence, and winding direction should be identified on the roll before the liner enters the tape line.
Paper, PET, and BOPP can all be used as tape-liner bases, but they are selected for different process needs. Paper liners often provide stiffness for slitting and die-cutting. PET film liners offer tighter caliper and moisture stability for higher-speed or precision converting. BOPP film liners are considered where flexibility and film handling are required. The base is chosen against the coating method, line speed, and cut quality, not as a generic material list.
Compatibility with Acrylic PSA, Rubber-Based PSA, and Hot-Melt Adhesive should be treated as a matching and qualification topic. The same liner may behave differently with each adhesive system after coating, aging, and slitting. Qualification should include Release Force (with method, adhesive type, angle, speed, dwell, and aging), Silicone Transfer, Subsequent Adhesion, and Coating Anchorage. Light, Medium, and Heavy may be used as informal grade labels only; they do not replace a measured release-force result.
A previously published temperature value of -20°C to +60°C may be used as a historical reference, but it must be confirmed by grade and method and is not a universal guarantee for every tape-liner grade. Medical tape applications may be discussed only when the actual adhesive system is validated on the intended liner. This liner is not a skin-contact medical material.
Benefits
- Built for tape coating, lamination, slitting, die-cutting, and controlled release on production lines.
- Single-Sided, Double-Sided, and Differential Release structures can be specified for the peel sequence.
- Paper, PET, and BOPP tape-liner options can be matched to stiffness, caliper, and moisture needs.
- Release Force, Silicone Transfer, Subsequent Adhesion, and Coating Anchorage can be qualified with the adhesive system.
- Acrylic PSA, Rubber-Based PSA, and Hot-Melt Adhesive matching is confirmed by grade and process trial, not assumed from a label.
How Is a Release Liner Used in Adhesive-Tape Manufacturing?
In tape manufacturing, the liner carries the adhesive through coating and any lamination step, then supports slitting and die-cutting before the tape is wound or the liner is removed. The release coating has to let the adhesive wet out and cure as required, then separate cleanly without silicone transfer that would reduce subsequent adhesion. High-speed lines also need stable unwind, slit-edge quality, and a release force that stays in range after aging. Hand peeling a short sample cannot confirm these production conditions.
Technical Data Sheet
Property | Description |
Base Material | Paper, PET, or BOPP as tape-liner options; confirm by grade and process |
Caliper | Previously published customizable range 50–200 microns; confirm by grade |
Release Force | Confirm by method, adhesive type, angle, speed, dwell, and aging. Light / Medium / Heavy are informal grade labels only, not a measured release-force value |
Temperature Resistance | Previously published value -20°C to +60°C; confirm by grade and method. Not a universal guarantee for all tape-liner grades |
Adhesive Compatibility | Acrylic PSA, Rubber-Based PSA, and Hot-Melt Adhesive require matching and qualification; not a pre-approved compatibility list |
Subsequent Adhesion, Silicone Transfer, and Coating Anchorage | Confirm by grade, agreed method, and aging |
Applications
- Pressure-sensitive adhesive tape manufacturing: Coating, drying or curing, and winding of single-face or double-sided tapes.
- Double-sided tape converting: Differential or double-sided release structures with a defined peel order.
- Adhesive coating and lamination: Liner support during coating and transfer to a face stock or foam.
- Rotary die-cutting and slitting: Caliper and release control for clean cuts and stable matrix or slit-edge behavior.
- Medical tape converting: Mentioned only where the actual adhesive system is validated on the liner; the liner itself is not a skin-contact medical material.

How Do Paper, PET, and BOPP Tape Liners Differ in Production?
Paper liners are often chosen when stiffness, printability, or die-cut support matters in tape and label-tape converting. PET liners are chosen when caliper control, moisture stability, or higher-speed film handling is required. BOPP liners may be reviewed where a thinner, more flexible film web is needed. Each option still has to be qualified with the adhesive, coating weight, line speed, and slitting or die-cutting method. A material name alone does not confirm Release Force or Subsequent Adhesion.

FAQ
What materials are used for adhesive tape release liners?
Paper, PET, and BOPP are used as tape-liner options. The choice depends on coating, slitting, die-cutting, and moisture or caliper needs, and should be confirmed by process trial.
Can the release force be customized?
Yes, but Release Force should be confirmed by method, adhesive type, angle, speed, dwell, and aging. Light, Medium, and Heavy are informal grade labels only.
Are these liners medical or skin-contact materials?
No. The liner is a process material for tape manufacturing. Medical tape use requires validation of the actual adhesive system and is not a claim that the liner is a skin-contact medical material.
How do I select the right liner for a tape line?
Start with the adhesive system (Acrylic PSA, Rubber-Based PSA, or Hot-Melt Adhesive), coated side, structure (single-sided, double-sided, or differential), and the required Release Force, Subsequent Adhesion, Silicone Transfer, and Coating Anchorage checks.











